54774302 is the solenoid valve that gates the pilot air supply. When the controller wants the machine to load, this valve opens and pilot air travels on to the capacity control valve and then to the servo cylinder, which drives the inlet valve open. When the controller wants to unload, the valve closes and that air is released, so the inlet valve shuts. Every load and unload cycle the machine makes passes through this one small valve.
Three patterns, depending on how it fails. If the coil is open, the valve never opens and the machine will not load at all - it runs unloaded, pressure never builds, and the controller shows no fault because nothing it monitors has gone out of range. If the valve sticks open, the machine loads but will not unload, and the safety valve eventually lifts. If the seat is worn or debris is trapped, the response becomes sluggish: loading and unloading come late, pressure overshoots, and cycles shorten. A coil that measures correct resistance but does not move the spool points at a mechanical problem rather than an electrical one.
Weight 2 kg. Check the coil voltage and the connector type before ordering - the same body is supplied with different coils, and a mismatched coil will not operate the valve even though it fits. Before fitting, blow out the pilot air line: a slug of water or pipe scale reaching the new valve seat reproduces the original fault within days.