23545841 is the separator element fitted to the R160IU-A10 and equivalent Ingersoll Rand screw compressors. Air leaving the airend carries oil as mist; the element's glass-fibre media coalesces that mist back into droplets, which drain to the sump through the return line. What reaches your dryer and your tools is air with less than 3 PPM of oil in it.
A separator that is changed and still carries oil is the most common complaint, and most of the time the element is not at fault. Oil reaching the discharge line after a fresh element usually means one of four things: the seals were rolled or pinched during fitting, the return line is blocked or not reaching the recess at the element centre, the oil is the wrong grade and foams, or the machine is overfilled. Each of these looks identical from the outside - oil in the trap, oil downstream - so check them before buying a second element.
A separator that is left blocked does not simply pass oil. Differential pressure across it rises until return flow through the drain line stops, and oil that cannot return accumulates in the sump while the airend keeps drawing from it. The result is a machine running short of oil at the bearings while the oil level still reads normal - damage that costs far more than the element. Against the price of an airend, the element is the cheapest insurance on the machine.
Superseded by 47726261001 - both numbers fit, order whichever is in stock. Fit with new seals every time, and earth the element during fitting: static can perforate the media and the element will pass oil from the first hour. Confirm the model plate reads R160IU-A10 or an equivalent before ordering.