| Weight | 1.5 kg |
| Dimensions | 10 × 10 × 10 cm |
| Fits | Ingersoll Rand screw compressors |
This is the solenoid that pilots the inlet valve. The controller cannot move a valve directly, so it switches this solenoid, and the solenoid sends control air to the servo cylinder. Every load and unload decision the controller makes passes through this component.
It is a small part in the middle of a long chain, which is why a failure here looks like a valve problem: the machine stops responding to the pressure band even though the valve itself is fine.
Replace on condition. Coils fail from heat and from moisture, not from hours. A solenoid that has failed twice on the same machine points to water in the control air or to a supply voltage problem, not to the solenoid.
Genuine Ingersoll Rand solenoid. Coils of the same voltage and port pattern are widely available, and that is exactly the problem: an unmatched coil either burns out early or holds the valve in the wrong position.
Genuine Ingersoll Rand: USD 590
Fits Ingersoll Rand screw compressors. Send the machine model plus the coil voltage marked on your existing solenoid, since the same valve body is used with more than one coil rating.
Weight 1.5 kg, packed 10 × 10 × 10 cm.